 |
| Quantity: | |
|---|---|
150
Seahawk
Product Description
| Equipment name | ￠150×16D extruder | |
| 1 | Equipment use | Extrude rubber and play the role of mixing and plasticizing, and use with the die for extrusion molding |
| 2 | Extrusion system | |
| 3 | Feeding method | The side pressure roller transmits power through the screw |
| 4 | Feeding structure | The side pressure roller gear meshes with the screw gear and is equipped with an automatic lubrication device. |
| 5 | Screw material | 38CrMOAL |
| 6 | Screw hardness | HRC65-68 |
| 7 | Hardness of steel sleeve | HRC65-70 |
| 8 | Nitriding depth | 0.4—0.7mm |
| 9 | Screw structure | without exhaust |
| 10 | Pressure control | With pressure sensor, pressure protection value is adjustable 0-50MPA |
| 11 | Extruder fixed | stationary |
| 12 | L/D | 16:01 |
| 13 | Screw diameter | 150mm |
| 14 | Screw speed | 5-45r/min |
| 15 | Maximum output | 900~1000kg/h (without pressure) |
| 16 | Temperature control system | |
| 17 | Number of heating sections/power | 6kw×6 |
| 18 | Number of cooling sections | 1 section (side pressure roller) |
| 19 | Temperature control method | Solenoid valve automatically controls heating and cooling |
| 20 | Circulating water pump brand | Oakland |
| 21 | Cooling water pressure | 0.15-2KG/C㎡ |
| 22 | Temperature control accuracy | ±1℃ |
| 23 | Drive system | |
| 24 | The screw is connected to the gearbox | using involute connection |
| 25 | Motor and gearbox drive | adopts belt drive |
| 26 | Hard tooth surface reducer model | Reducer (involute) ZLYJ420-20-5 |
| 27 | Motor power | Motor [315S-4]-B3（160KW） |
| 28 | The total power of the equipment | about 200KW |
| 29 | Speed control mode | Frequency conversion speed control |
